Only Swedish quality pinewood, felled at latitudes between 59 and 65 degrees.

The raw material comes from Rundvirke Skog AB

All trees are inspected/marked before felling.

For the best possible timber care, each log is immediately debarked on arrival at the production plant.

As soon as they have been debarked the logs are stacked in piles for air drying for about a year, or they are dried in our specially constructed solid wood dryers for about three days.

When the moisture level of the wood falls below 28% the log is dry enough for impregnation. To remove resins and to achieve a good surface finish, about 3-5 mm of the surface wood is shaved off. This procedure also means that the penetrative effect of the impregnating agent reaches the heart.

The poles are impregnated with creosote oil that is distilled from coal tar, or with a copper-based metallic salt, in accordance with all the relevant standards.

After impregnation the penetration and absorption of the impregnation solution in the sapwood is checked.

We always have around 125-150,000 poles in stock and a 24-hour service for emergency jobs. We deliver by road, rail or vessel.

Produced according to the relevant standards. Lengths from 8 m to 23 m.

Produced according to the relevant standards. Lengths from 6 m to 12 m.